Paradigm®
Click image to enlargePW-2100
Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in Super-Class-D™ amplifier. 1500 watts Dynamic Peak / 500 watts RMS
Basso Profundo PW Series subwoofers deliver astounding bass with staggering definition and dynamic impact. Superior high-power drivers together with the brute power of our patented Super-Class-D™ discrete amplifiers ensure dramatically superior flat power response and ultra-low distortion. These subwoofers are pure magic—their visceral power, astonishing detail and incredible output put them in a league with far more expensive subwoofers. Control Facilities: • Auto On/Off • Subwoofer Level • Subwoofer Cut-Off Frequency (continuously variable 50 Hz – 150 Hz) • Sub/Sat Phase Alignment (continuously variable 0° to 180°) Input Facilities: • Line-Level Input • Line-Level High-Pass Output Highly Advanced Super-Class-D™ Discrete Design Amplifiers deliver massive amounts of high-current power with exceptionally low distortion: 1500 watts Dynamic Peak / 500 watts RMS Sustained. Superior Mineral-Filled Co-Polymer Polypropylene Cones with RCR™ resonance-control stiffening ribs combine excellent internal damping, high stiffness and low mass for tremendous freedom from unwanted resonances and distortion. Massive Magnet Structures and Advanced Suspensions aid in greater cone excursion while maintaining strict control over cone movement. Massive Heatsinks and Proprietary AVS™ Airflow Ventilation System Cooling increase power handling and dramatically reduce distortion. High-Velocity Low-Noise Ports with critically flared openings ensure maximum bass efficiency with minimum turbulence distortion. Acoustically Inert Hardboard and Strategically Located Radial Braces limit resonances and increase enclosure stiffness. * DIN 45 500. Indicates -3 dB in a typical listening room. Overview

Specifications
SPECIFICATIONS
Design
Single driver, bass reflex,
high-velocity low-turbulence
resistive port, built-in
Super-Class-D™ amplifier
Amplifier: High-Current,
Discrete Output1500 watts Dynamic Peak /
500 watts RMS
Amplifier Features
Auto-On / Off, soft clipping
Bass Driver
254-mm (10 in) RCR™ mineral-filled
co-polymer polypropylene cone, 38-mm
(1-1/2 in) 4-layer voice-coil, dual spiders,
AVS™ die-cast heatsink chassis
Low-Frequency Extension*
23 Hz (DIN)
Subwoofer Cut-Off Frequency
Variable 50 Hz - 150 Hz
Sub / Sat Phase Alignment
Variable 0° - 180°
Line-Level Input
From Sub-Out / LFE-Out of receiver,
processor or other line-level source
Line-Level Input Sensitivity
100 mV stereo; 200 mV mono
Line-Level Input Impedance
15k ohms
Line-Level High-Pass Output
To Left / Right amplifier input or
Left / Right Main-In of receiver
Line-Level High-Pass Output
Roll-Off3rd-order 18 dB / octave at 80 Hz
Internal Volume
42.8 L / 1.51 cu ft
Height, Width, Depth
38.1 cm x 34.9 cm x 51.0 cm
15 in x 13-3/4 in x 20-1/16 in
(Height includes feet)
Weight (unpacked)
19 kg / 42 lb each
Finishes
Light Cherry, Rosenut, Black Ash





